bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about GMC Yukon XL


  • Utility Trailer Built with 6000 Lb Dexter Axle
  • I recommend the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange, 12" - Left/Right Hand Assemblies for 6K, # 23-105-106-09. If you have a modified axle with parts that are welded on and do actually need to be removed that will require cutting. At that point I would consider the advantage of buying a new axle vs. removing and replacing multiple parts on an older modified axle. But first, please review the installation video of this product. I think this is what is needed for your...
    view full answer...

  • Load Stops That Will Fit Factory Roof Rack On 2013 GMC Yukon XL
  • If your rails happen to have the T slot top channel then you could use Load Stops for Rhino-Rack Vortex Aero Crossbars or Pioneer Platform Rack - 5" Tall # RRRLH2. If you do not have the t slot channel and just have the standard roof rails then this will not work. If you don't have a roof rack with a t slot channel then I recommend adding the Malone AirFlow2 Roof Rack - Aero Crossbars - Raised, Factory Side Rails - Aluminum - 58" Long # MPG216 which will attach to your Yukon's side rails....
    view full answer...

  • Towing Mirrors for 2015 GMC Yukon Denali XL
  • Our suppliers do not offer custom-fit towing mirrors for your 2015 GMC Yukon Denali XL but we do offer universal-fit mirrors that will work. A popular choice is the K-Source # KS3891 which fits most mirrors that have a gap between the housing and mirror surface. The linked video illustrates its features and installation. It fits both driver- and passenger-side mirrors. For an even wider field of view you might consider the door-mount mirror # 11650 which also is a universal fit.
    view full answer...

  • Towing Mirrors for 2015 GMC Yukon XL
  • For your 2015 GMC Yukon XL, your best bet for a towing mirror would be a universal mirror like the K-Source # KS3891 or the Cipa # 11650 Deluxe Door Mount Mirror. The K-Source Universal mirror features sturdy rubber straps that ratchet into place, ensuring a tight fit to the existing factory mirror. The Cipa mirror fits on the door, and offers an almost completely vibration free view. Both mirrors are very highly rated by our customers. Cipa only shows a custom slide on mirror fit for...
    view full answer...

  • Wiring Adapter for Tekonsha Prodigy P2 90885 on a 2007 Yukon XL
  • There is no direct plug present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash with the # 7894 that is included with your Tekonsha Prodigy P2 brake controller # 90885. I have linked a video of the brake controller being installed on a similar vehicle to your Yukon for your convenience.
    view full answer...

  • Aluminum Trailer Wheels with 4 on 4 Bolt Pattern
  • The # AKIHUB-440-2-G-1K hubs you referenced are compatible with 8,10,12, 13 and 14 inch wheels. We do offer some 12 x 4 and 13 x 5 aluminum wheels with a 4 on 4 bolt pattern. • Aluminum Split Spoke Trailer Wheel - 13" x 5" # AM22322HWT • Aluminum Split Spoke Trailer Wheel - 12" x 4" # AM22318HWT • Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel - 13" x 5" # AM20270 • Aluminum HWT Series S5 Trailer Wheel - 13" x 5" # AM22322HWTB
    view full answer...

  • Driver Side Mirror with Electric Operation, Heat, and Turn Signal for 2005 GMC Yukon XL 1500
  • The CIPA replacement driver side mirror for the 2005 GMC Yukon XL, # CM27352, has heat and electric operation but does not have a built-in turn signal. Your best option, if you only need the glass anyway, is to get the replacement part from a GM dealer. The other option is to replace both mirrors with towing mirrors that do have the turn signal function using # KS62075-76G.
    view full answer...

  • Best Towing Mirrors for 2019 GMC Yukon XL
  • Yes, the K-Source Snap & Zap Custom Towing Mirrors, # KS80920 are confirmed to fit the 2019 GMC Yukon XL. With these towing mirrors, you get a guaranteed fit and seamless OEM style as they match the contours of your factory mirrors, and retain use of puddle lamps and power folding functions Checkout the product review and installation video of this product on a 2019 Yukon.
    view full answer...

  • Timbren Suspension Enhancement Recommendation for 2011 GMC Yukon XL Denali
  • For your 2011 GMC Yukon XL the correct Timbren kit for the rear axle is the part # TGMRYS4. This fits the Denali models as well so it would be the correct fit for you.
    view full answer...

  • Electronic Sway Control Availability for Trailer Pulled With 2011 GMC Yukon XL
  • The Hayes Sway Master is no longer available from Hayes. A great alternative is the Tuson Asymmetric Sway Control # 335TSC-1000. This system can actually control the left and right side brakes independently. The module is smart enough to be able to detect whether the sway is caused by wind or from building sway and will automatically adjust when on rough terrain.
    view full answer...

  • Is There a Class V Trailer Hitch Receiver Available For a 2002 GMC Yukon XL 2500? ?
  • Looking online it appears the frame used on your 2002 GMC Yukon XL 2500 was also used on the Suburban 2500 and Avalanche 2500 for the model year. I do see a Curt Trailer Hitch Receiver available in a Class IV # 14080 rating but there is not a class V custom fit receiver for any of these models. Do note since we have not confirmed the fit of this receiver on Yukon XL 2500 you may be best going with a Universal Class V Receiver # 15901. While this will require welding onto your frame you...
    view full answer...

  • Cargo Area Liner for Behind 3rd Row Seats in 2015 GMC Yukon XL
  • We offer a cargo area liner from Husky, their # HL28231. This black mat fits from the 2nd row seat to the rear of the vehicle, and will fit over a 3rd row seat that is folded down flat. The mats' rubberized thermoplastic material won't crack or break and it withstands most hazardous chemicals. It features raised containment walls to keep messes from seeping over the edges and onto your carpet. These and many other cargo area liners are viewable on the link provided.
    view full answer...

  • Is the Passenger Side Glass Convex for CIPA Custom Towing Mirrors for a 2011 GMC Yukon Denali
  • The glass that is in both passenger and driver side mirrors in the CIPA custom towing mirror set # 10902 is flat glass. It does not magnify at all. It just seems that way because it is next to the convex glass of the factory mirror. A convex glass insert is not available that will be an exact fit but you can use something like # 49402 that can stick on.
    view full answer...

  • MagnaFlow Exhaust for a 2015 GMC Yukon XL Denali with 6.2 Liter Motor
  • For your 2015 GMC Yukon XL Denali with the 6.2 liter motor you can use MagnaFlow exhaust # MF19040. This is a stainless steel cat-back exhaust system and it carriers a lifetime warranty. I had a MagnaFlow system on one of my vehicles and the sound is superb. A deep growl but not overpowering when cruising. You're going to love it!
    view full answer...

  • Universal Towing Mirror Options for 2017 GMC Yukon XL
  • You may want to consider some universal towing mirrors since no new custom-fit items are yet available for your 2017 GMC Yukon XL. We offer clip-on towing mirror # KS3891 from K-Source as well as a door-mount option, part # 11650. Mirrors that mount away from your primary vehicle mirrors can take some adjustment time since you have to train yourself to look in another spot for the trailer view. But on the upside they can give you a review perspective that is hard to get from a clip-on mirror.
    view full answer...

  • Weight Distribution System Recommendation for a 2013 Yukon XL Towing Camper
  • The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. It sounds like your setup has a...
    view full answer...